projects:avrada:tool_samplem8
with Interfaces; use Interfaces; with System; -- architecture = AVR8 -- AVR Studio 5 XML avr register definition generator -- Maciej Kucia, Krakow 2012 package AVR.ATmega8 is -- -- ANALOG_COMPARATOR -- -- Special Function IO Register SFIOR : Unsigned_8; for SFIOR'Address use System'To_Address (16#50#); SFIOR_ACME : constant := 16#08#; -- Analog Comparator Multiplexer Enable -- -- SFIOR -- -- Analog Comparator Control And Status Register ACSR : Unsigned_8; for ACSR'Address use System'To_Address (16#28#); ACSR_ACD : constant := 16#80#; -- Analog Comparator Disable ACSR_ACBG : constant := 16#40#; -- Analog Comparator Bandgap Select ACSR_ACO : constant := 16#20#; -- Analog Compare Output ACSR_ACI : constant := 16#10#; -- Analog Comparator Interrupt Flag ACSR_ACIE : constant := 16#08#; -- Analog Comparator Interrupt Enable ACSR_ACIC : constant := 16#04#; -- Analog Comparator Input Capture Enable ACSR_ACIS : constant := 16#03#; -- Analog Comparator Interrupt Mode Select bits -- -- SPI -- -- SPI Data Register SPDR : Unsigned_8; for SPDR'Address use System'To_Address (16#2F#); -- -- SPDR -- -- SPI Status Register SPSR : Unsigned_8; for SPSR'Address use System'To_Address (16#2E#); SPSR_SPIF : constant := 16#80#; -- SPI Interrupt Flag SPSR_WCOL : constant := 16#40#; -- Write Collision Flag SPSR_SPI2X : constant := 16#01#; -- Double SPI Speed Bit -- -- SPSR -- -- SPI Control Register SPCR : Unsigned_8; for SPCR'Address use System'To_Address (16#2D#); SPCR_SPIE : constant := 16#80#; -- SPI Interrupt Enable SPCR_SPE : constant := 16#40#; -- SPI Enable SPCR_DORD : constant := 16#20#; -- Data Order SPCR_MSTR : constant := 16#10#; -- Master/Slave Select SPCR_CPOL : constant := 16#08#; -- Clock polarity SPCR_CPHA : constant := 16#04#; -- Clock Phase SPCR_SPR : constant := 16#03#; -- SPI Clock Rate Selects -- -- EXTERNAL_INTERRUPT -- -- General Interrupt Control Register GICR : Unsigned_8; for GICR'Address use System'To_Address (16#5B#); GICR_INT : constant := 16#C0#; -- External Interrupt Request 1 Enable GICR_IVSEL : constant := 16#02#; -- Interrupt Vector Select GICR_IVCE : constant := 16#01#; -- Interrupt Vector Change Enable -- -- GICR -- -- General Interrupt Flag Register GIFR : Unsigned_8; for GIFR'Address use System'To_Address (16#5A#); GIFR_INTF : constant := 16#C0#; -- External Interrupt Flags -- -- GIFR -- -- MCU Control Register MCUCR : Unsigned_8; for MCUCR'Address use System'To_Address (16#55#); MCUCR_ISC1 : constant := 16#0C#; -- Interrupt Sense Control 1 Bits MCUCR_ISC0 : constant := 16#03#; -- Interrupt Sense Control 0 Bits -- -- TIMER_COUNTER_0 -- -- Timer/Counter Interrupt Mask Register TIMSK : Unsigned_8; for TIMSK'Address use System'To_Address (16#59#); TIMSK_TOIE0 : constant := 16#01#; -- Timer/Counter0 Overflow Interrupt Enable -- -- TIMSK -- -- Timer/Counter Interrupt Flag register TIFR : Unsigned_8; for TIFR'Address use System'To_Address (16#58#); TIFR_TOV0 : constant := 16#01#; -- Timer/Counter0 Overflow Flag -- -- TIFR -- -- Timer/Counter0 Control Register TCCR0 : Unsigned_8; for TCCR0'Address use System'To_Address (16#53#); TCCR0_CS02 : constant := 16#04#; -- Clock Select0 bit 2 TCCR0_CS01 : constant := 16#02#; -- Clock Select0 bit 1 TCCR0_CS00 : constant := 16#01#; -- Clock Select0 bit 0 -- -- TCCR0 -- -- Timer Counter 0 TCNT0 : Unsigned_8; for TCNT0'Address use System'To_Address (16#52#); -- -- TIMER_COUNTER_1 -- -- Timer/Counter Interrupt Mask Register TIMSK : Unsigned_8; for TIMSK'Address use System'To_Address (16#59#); TIMSK_TICIE1 : constant := 16#20#; -- Timer/Counter1 Input Capture Interrupt Enable TIMSK_OCIE1A : constant := 16#10#; -- Timer/Counter1 Output CompareA Match Interrupt Enable TIMSK_OCIE1B : constant := 16#08#; -- Timer/Counter1 Output CompareB Match Interrupt Enable TIMSK_TOIE1 : constant := 16#04#; -- Timer/Counter1 Overflow Interrupt Enable -- -- TIMSK -- -- Timer/Counter Interrupt Flag register TIFR : Unsigned_8; for TIFR'Address use System'To_Address (16#58#); TIFR_ICF1 : constant := 16#20#; -- Input Capture Flag 1 TIFR_OCF1A : constant := 16#10#; -- Output Compare Flag 1A TIFR_OCF1B : constant := 16#08#; -- Output Compare Flag 1B TIFR_TOV1 : constant := 16#04#; -- Timer/Counter1 Overflow Flag -- -- TIFR -- -- Timer/Counter1 Control Register A TCCR1A : Unsigned_8; for TCCR1A'Address use System'To_Address (16#4F#); TCCR1A_COM1A : constant := 16#C0#; -- Compare Output Mode 1A, bits TCCR1A_COM1B : constant := 16#30#; -- Compare Output Mode 1B, bits TCCR1A_FOC1A : constant := 16#08#; -- Force Output Compare 1A TCCR1A_FOC1B : constant := 16#04#; -- Force Output Compare 1B TCCR1A_WGM1 : constant := 16#03#; -- Waveform Generation Mode -- -- TCCR1A -- -- Timer/Counter1 Control Register B TCCR1B : Unsigned_8; for TCCR1B'Address use System'To_Address (16#4E#); TCCR1B_ICNC1 : constant := 16#80#; -- Input Capture 1 Noise Canceler TCCR1B_ICES1 : constant := 16#40#; -- Input Capture 1 Edge Select TCCR1B_WGM1 : constant := 16#18#; -- Waveform Generation Mode TCCR1B_CS1 : constant := 16#07#; -- Prescaler source of Timer/Counter 1 -- -- TCCR1B -- -- Timer/Counter1 Bytes TCNT1 : Unsigned_8; for TCNT1'Address use System'To_Address (16#4C#); -- -- TCNT1 -- -- Timer/Counter1 Output Compare Register Bytes OCR1A : Unsigned_8; for OCR1A'Address use System'To_Address (16#4A#); -- -- OCR1A -- -- Timer/Counter1 Output Compare Register Bytes OCR1B : Unsigned_8; for OCR1B'Address use System'To_Address (16#48#); -- -- OCR1B -- -- Timer/Counter1 Input Capture Register Bytes ICR1 : Unsigned_8; for ICR1'Address use System'To_Address (16#46#); -- -- TIMER_COUNTER_2 -- -- Timer/Counter Interrupt Mask register TIMSK : Unsigned_8; for TIMSK'Address use System'To_Address (16#59#); TIMSK_OCIE2 : constant := 16#80#; -- Timer/Counter2 Output Compare Match Interrupt Enable TIMSK_TOIE2 : constant := 16#40#; -- Timer/Counter2 Overflow Interrupt Enable -- -- TIMSK -- -- Timer/Counter Interrupt Flag Register TIFR : Unsigned_8; for TIFR'Address use System'To_Address (16#58#); TIFR_OCF2 : constant := 16#80#; -- Output Compare Flag 2 TIFR_TOV2 : constant := 16#40#; -- Timer/Counter2 Overflow Flag -- -- TIFR -- -- Timer/Counter2 Control Register TCCR2 : Unsigned_8; for TCCR2'Address use System'To_Address (16#45#); TCCR2_FOC2 : constant := 16#80#; -- Force Output Compare TCCR2_WGM20 : constant := 16#40#; -- Waveform Genration Mode TCCR2_COM2 : constant := 16#30#; -- Compare Output Mode bits TCCR2_WGM21 : constant := 16#08#; -- Waveform Generation Mode TCCR2_CS2 : constant := 16#07#; -- Clock Select bits -- -- TCCR2 -- -- Timer/Counter2 TCNT2 : Unsigned_8; for TCNT2'Address use System'To_Address (16#44#); -- -- TCNT2 -- -- Timer/Counter2 Output Compare Register OCR2 : Unsigned_8; for OCR2'Address use System'To_Address (16#43#); -- -- OCR2 -- -- Asynchronous Status Register ASSR : Unsigned_8; for ASSR'Address use System'To_Address (16#42#); ASSR_AS2 : constant := 16#08#; -- Asynchronous Timer/counter2 ASSR_TCN2UB : constant := 16#04#; -- Timer/Counter2 Update Busy ASSR_OCR2UB : constant := 16#02#; -- Output Compare Register2 Update Busy ASSR_TCR2UB : constant := 16#01#; -- Timer/counter Control Register2 Update Busy -- -- ASSR -- -- Special Function IO Register SFIOR : Unsigned_8; for SFIOR'Address use System'To_Address (16#50#); SFIOR_PSR2 : constant := 16#02#; -- Prescaler Reset Timer/Counter2 -- -- USART -- -- USART I/O Data Register UDR : Unsigned_8; for UDR'Address use System'To_Address (16#2C#); -- -- UDR -- -- USART Control and Status Register A UCSRA : Unsigned_8; for UCSRA'Address use System'To_Address (16#2B#); UCSRA_RXC : constant := 16#80#; -- USART Receive Complete UCSRA_TXC : constant := 16#40#; -- USART Transmitt Complete UCSRA_UDRE : constant := 16#20#; -- USART Data Register Empty UCSRA_FE : constant := 16#10#; -- Framing Error UCSRA_DOR : constant := 16#08#; -- Data overRun UCSRA_UPE : constant := 16#04#; -- Parity Error UCSRA_U2X : constant := 16#02#; -- Double the USART transmission speed UCSRA_MPCM : constant := 16#01#; -- Multi-processor Communication Mode -- -- UCSRA -- -- USART Control and Status Register B UCSRB : Unsigned_8; for UCSRB'Address use System'To_Address (16#2A#); UCSRB_RXCIE : constant := 16#80#; -- RX Complete Interrupt Enable UCSRB_TXCIE : constant := 16#40#; -- TX Complete Interrupt Enable UCSRB_UDRIE : constant := 16#20#; -- USART Data register Empty Interrupt Enable UCSRB_RXEN : constant := 16#10#; -- Receiver Enable UCSRB_TXEN : constant := 16#08#; -- Transmitter Enable UCSRB_UCSZ2 : constant := 16#04#; -- Character Size UCSRB_RXB8 : constant := 16#02#; -- Receive Data Bit 8 UCSRB_TXB8 : constant := 16#01#; -- Transmit Data Bit 8 -- -- UCSRB -- -- USART Control and Status Register C UCSRC : Unsigned_8; for UCSRC'Address use System'To_Address (16#40#); UCSRC_URSEL : constant := 16#80#; -- Register Select UCSRC_UMSEL : constant := 16#40#; -- USART Mode Select UCSRC_UPM : constant := 16#30#; -- Parity Mode Bits UCSRC_USBS : constant := 16#08#; -- Stop Bit Select UCSRC_UCSZ : constant := 16#06#; -- Character Size UCSRC_UCPOL : constant := 16#01#; -- Clock Polarity -- -- UCSRC -- -- USART Baud Rate Register Hight Byte UBRRH : Unsigned_8; for UBRRH'Address use System'To_Address (16#40#); -- -- UBRRH -- -- USART Baud Rate Register Low Byte UBRRL : Unsigned_8; for UBRRL'Address use System'To_Address (16#29#); -- -- TWI -- -- TWI Bit Rate register TWBR : Unsigned_8; for TWBR'Address use System'To_Address (16#20#); -- -- TWBR -- -- TWI Control Register TWCR : Unsigned_8; for TWCR'Address use System'To_Address (16#56#); TWCR_TWINT : constant := 16#80#; -- TWI Interrupt Flag TWCR_TWEA : constant := 16#40#; -- TWI Enable Acknowledge Bit TWCR_TWSTA : constant := 16#20#; -- TWI Start Condition Bit TWCR_TWSTO : constant := 16#10#; -- TWI Stop Condition Bit TWCR_TWWC : constant := 16#08#; -- TWI Write Collition Flag TWCR_TWEN : constant := 16#04#; -- TWI Enable Bit TWCR_TWIE : constant := 16#01#; -- TWI Interrupt Enable -- -- TWCR -- -- TWI Status Register TWSR : Unsigned_8; for TWSR'Address use System'To_Address (16#21#); TWSR_TWS : constant := 16#F8#; -- TWI Status TWSR_TWPS : constant := 16#03#; -- TWI Prescaler -- -- TWSR -- -- TWI Data register TWDR : Unsigned_8; for TWDR'Address use System'To_Address (16#23#); -- -- TWDR -- -- TWI (Slave) Address register TWAR : Unsigned_8; for TWAR'Address use System'To_Address (16#22#); TWAR_TWA : constant := 16#FE#; -- TWI (Slave) Address register Bits TWAR_TWGCE : constant := 16#01#; -- TWI General Call Recognition Enable Bit -- -- WATCHDOG -- -- Watchdog Timer Control Register WDTCR : Unsigned_8; for WDTCR'Address use System'To_Address (16#41#); WDTCR_WDCE : constant := 16#10#; -- Watchdog Change Enable WDTCR_WDE : constant := 16#08#; -- Watch Dog Enable WDTCR_WDP : constant := 16#07#; -- Watch Dog Timer Prescaler bits -- -- PORTB -- -- Port B Data Register PORTB : Unsigned_8; for PORTB'Address use System'To_Address (16#38#); -- -- PORTB -- -- Port B Data Direction Register DDRB : Unsigned_8; for DDRB'Address use System'To_Address (16#37#); -- -- DDRB -- -- Port B Input Pins PINB : Unsigned_8; for PINB'Address use System'To_Address (16#36#); -- -- PORTC -- -- Port C Data Register PORTC : Unsigned_8; for PORTC'Address use System'To_Address (16#35#); -- -- PORTC -- -- Port C Data Direction Register DDRC : Unsigned_8; for DDRC'Address use System'To_Address (16#34#); -- -- DDRC -- -- Port C Input Pins PINC : Unsigned_8; for PINC'Address use System'To_Address (16#33#); -- -- PORTD -- -- Port D Data Register PORTD : Unsigned_8; for PORTD'Address use System'To_Address (16#32#); -- -- PORTD -- -- Port D Data Direction Register DDRD : Unsigned_8; for DDRD'Address use System'To_Address (16#31#); -- -- DDRD -- -- Port D Input Pins PIND : Unsigned_8; for PIND'Address use System'To_Address (16#30#); -- -- EEPROM -- -- EEPROM Address Register Bytes EEAR : Unsigned_8; for EEAR'Address use System'To_Address (16#3E#); -- -- EEAR -- -- EEPROM Data Register EEDR : Unsigned_8; for EEDR'Address use System'To_Address (16#3D#); -- -- EEDR -- -- EEPROM Control Register EECR : Unsigned_8; for EECR'Address use System'To_Address (16#3C#); EECR_EERIE : constant := 16#08#; -- EEPROM Ready Interrupt Enable EECR_EEMWE : constant := 16#04#; -- EEPROM Master Write Enable EECR_EEWE : constant := 16#02#; -- EEPROM Write Enable EECR_EERE : constant := 16#01#; -- EEPROM Read Enable -- -- CPU -- -- Status Register SREG : Unsigned_8; for SREG'Address use System'To_Address (16#5F#); SREG_I : constant := 16#80#; -- Global Interrupt Enable SREG_T : constant := 16#40#; -- Bit Copy Storage SREG_H : constant := 16#20#; -- Half Carry Flag SREG_S : constant := 16#10#; -- Sign Bit SREG_V : constant := 16#08#; -- Two's Complement Overflow Flag SREG_N : constant := 16#04#; -- Negative Flag SREG_Z : constant := 16#02#; -- Zero Flag SREG_C : constant := 16#01#; -- Carry Flag -- -- SREG -- -- Stack Pointer SP : Unsigned_8; for SP'Address use System'To_Address (16#5D#); -- -- SP -- -- MCU Control Register MCUCR : Unsigned_8; for MCUCR'Address use System'To_Address (16#55#); MCUCR_SE : constant := 16#80#; -- Sleep Enable MCUCR_SM : constant := 16#70#; -- Sleep Mode Select MCUCR_ISC1 : constant := 16#0C#; -- Interrupt Sense Control 1 Bits MCUCR_ISC0 : constant := 16#03#; -- Interrupt Sense Control 0 Bits -- -- MCUCR -- -- MCU Control And Status Register MCUCSR : Unsigned_8; for MCUCSR'Address use System'To_Address (16#54#); MCUCSR_WDRF : constant := 16#08#; -- Watchdog Reset Flag MCUCSR_BORF : constant := 16#04#; -- Brown-out Reset Flag MCUCSR_EXTRF : constant := 16#02#; -- External Reset Flag MCUCSR_PORF : constant := 16#01#; -- Power-on reset flag -- -- MCUCSR -- -- Oscillator Calibration Value OSCCAL : Unsigned_8; for OSCCAL'Address use System'To_Address (16#51#); -- -- OSCCAL -- -- Store Program Memory Control Register SPMCR : Unsigned_8; for SPMCR'Address use System'To_Address (16#57#); SPMCR_SPMIE : constant := 16#80#; -- SPM Interrupt Enable SPMCR_RWWSB : constant := 16#40#; -- Read-While-Write Section Busy SPMCR_RWWSRE : constant := 16#10#; -- Read-While-Write Section Read Enable SPMCR_BLBSET : constant := 16#08#; -- Boot Lock Bit Set SPMCR_PGWRT : constant := 16#04#; -- Page Write SPMCR_PGERS : constant := 16#02#; -- Page Erase SPMCR_SPMEN : constant := 16#01#; -- Store Program Memory Enable -- -- SPMCR -- -- Special Function IO Register SFIOR : Unsigned_8; for SFIOR'Address use System'To_Address (16#50#); SFIOR_ADHSM : constant := 16#10#; -- ADC High Speed Mode SFIOR_PUD : constant := 16#04#; -- Pull-up Disable SFIOR_PSR10 : constant := 16#01#; -- Prescaler Reset Timer/Counter1 and Timer/Counter0 -- -- AD_CONVERTER -- -- The ADC multiplexer Selection Register ADMUX : Unsigned_8; for ADMUX'Address use System'To_Address (16#27#); ADMUX_REFS : constant := 16#C0#; -- Reference Selection Bits ADMUX_ADLAR : constant := 16#20#; -- Left Adjust Result ADMUX_MUX : constant := 16#0F#; -- Analog Channel and Gain Selection Bits -- -- ADMUX -- -- The ADC Control and Status register ADCSRA : Unsigned_8; for ADCSRA'Address use System'To_Address (16#26#); ADCSRA_ADEN : constant := 16#80#; -- ADC Enable ADCSRA_ADSC : constant := 16#40#; -- ADC Start Conversion ADCSRA_ADFR : constant := 16#20#; -- ADC Free Running Select ADCSRA_ADIF : constant := 16#10#; -- ADC Interrupt Flag ADCSRA_ADIE : constant := 16#08#; -- ADC Interrupt Enable ADCSRA_ADPS : constant := 16#07#; -- ADC Prescaler Select Bits -- -- ADCSRA -- -- ADC Data Register Bytes ADC : Unsigned_8; for ADC'Address use System'To_Address (16#24#); end AVR.ATmega8;
projects/avrada/tool_samplem8.txt · Last modified: 2012/08/05 11:00 by mkucia